Chuck Controllers and Replacement Parts

The Flux Master controls were developed by Magna-Lock USA to provide rectified DC power and control for all makes of electromagnetic chucks.  All control and power modules are housed in rugged, splash-proof enclosures.  Standard models range from 150 through 10,000 watts capacity and 0-100% variable holding is standard on all models.  Models rated at 500 watts or larger have a separate wall-mounted power enclosure which is normally located at the rear of the machine. 

Model F15MY1
Model F15MY1 chuck control is a manually operated Flux Master control. It has a three-position toggle switch which is used in controlling the chuck by selecting ON, OFF, and release. This model controller has 115 VAC and 115 VDC and 150 Watts capacity. Unit is contained in a NEMA XII enclosure with 6’ of 3 wire AC cord and plug and 6’ DC power cord and weighs approximately 9 lbs.
Inside View of CC Chuck Control Unit
In our CC series chuck controllers, all electrical controls and power functions are housed in wall-mounted enclosure with remote control station allowing mounting position convenient to operator.
Chuck Control SCC Series
Remote operated auto chuck control unit with either 115 or 230 VAC, 115 or 230 VDC, and 300 total watts. This model has a variable hold of 0 to 100% and auto demagnetize cycle which can be set to fast or slow. Operation modes are full ON, variable hold, residual, release (demagnetize) with indicator lights. It has a NEMA enclosure with 8-foot AC input cord and 8-foot DC output cord. This unit weights approximately 30 lbs.
Inside view of 10,000 Watt CC Series Chuck Control
Magna Lock manufactures chuck controls in our CC series with wattage ratings from 300 to 10000 and 230 or 460 volts AC (60 Hz 10) input.
Chuck Control Manuals
Our larger chuck controllers are shipped with a manual to assist with set up and troubleshooting. Always read and follow instruction manuals and safety warnings. It may be necessary to consult a qualified electrical contractor to assist you. Testing and analysis of electromagnetism and electricity should only be done by trained electricians that are qualified and trained to do so.
CC Model Chuck Control with Remote
We offer standard Model CC chuck controls with either 115 or 230 VDC, 230 or 460 VAC and watts ranging from 500 to 10,000. These models include remote control NEMA enclosure with operation switches and indicator lights and NEMA main enclosure with fused disconnect switch. All models have 0 to 100% variable hold control and automatic de-magnetize cycles (fast/slow). Weight varies with model and transformer used.
Optional stand for CC Models
Optional stand for our Model CC chuck control. Includes two stands that bolt to underside of control cabinet and have pre-drilled holes for mounting stand to floor. Dimensions and weight vary with each model.
Chuck Control F15MY1
This model is stocked at our facility and ready for shipment in most cases the same day when a customer places an order by noon CST.
Show More

5015 28th Avenue

Rockford, IL  61109


  • YouTube
  • Twitter
  • LinkedIn - Black Circle
  • Instagram
  • Facebook

© 2021 by Obsidian Manufacturing Industries, Inc.

Chuck Control F15MY1

This model is stocked at our facility and ready for shipment in most cases the same day when a customer places an order by noon CST.