2730 Eastrock Drive  Rockford, IL 61109    815.962.8700     Home   |   Search   |   Email   |  Quotes  |   Warranty   Ideal for use with:    Multiple Carvers, Profilers, Routers, Lathes, Shapers, Polishers    Drum Sanders, Rosette Cutters, Drill Presses, Boring Machines, Hand and Portable Tool Work Work can be machined to templates with desired patterns or contours for multiple production of parts Eliminate costly set-up and change over time Eliminate surface-marring clamps and fixtures Recommended vacuum supply system for models listed below is TV-171S (see page 13) Dump valves, rotary couplings, etc. available at extra cost 9/32-inch Channel-Seal recommended for standard 1/8-inch wide by 1/4-inch deep grooves Additional models available with abrasive or rubberized work surfaces    Diameter   Groove Pattern (B)   Weight     Model   Inches   mm   Inches   mm   Lbs   kg   MRV-12W   12.5   317   2   51   11.4   5.1   MRV-9W   9.5   241   2   51   6.4   2.9   MRV-6W   6.5   165   1.5   38   2.8   1.3            L x W   Groove Pattern (B)   Weight     Model   Inches   mm   Inches   mm   Lbs   kg   MAV-1212W   12   305   1   25   14.5   6.5   MAV-909W   9   229   0.5   13   8.2   3.7   MAV-606W   6   152   0.5   13   3.6   1.6

Home   |   Search   |   Email   |  Quotes  |   Warranty  |  Contact

Copyright ©2003 Magnalock USA. All rights reserved   Magnalock USA