|
|
| 2730
Eastrock Drive Rockford, IL 61109 815.962.8700 |
|
|
Rectangular-MAV | Rotary-MAV-RC & MAV-RS | For Woodworking-MAV-W & MRV-W | Automatic Vacuum System - TV | Vac-Master Vacuum System
Applying the concept of negative pressure, Magna-Lock Vacuum Chucks hold non-porous materials, including ferrous, non-ferrous and non-metallic materials and workpieces with dependable vacuum holding power. Vacuum Chucks can hold workpieces of virtually any configuration, including sheets, plates, shapes and extrusions.
Magna-Lock Vacuum Chucks ensure accuracy because workpieces are registered directly on the face of the chuck, not suspended on O-rings or fixed seals. Their compact size, simple design and versatility improve production and increase output.
Vacuum Chucks are available in a wide variety of standard sizes to fit most existing machining and assembly equipment. If models in this catalog do not fit your requirements, contact a Magna-Lock sales engineer for assistance in developing the optimum workholding solution.
Magna-Lock Vacuum Chucks:
|
 |
| Chuck Size |
|
Holding Force |
| 1 square inch |
|
13 pounds |
| 5 square inch |
|
65 pounds |
| 6 square inch |
|
936 pounds |
| 1 square foot |
|
1,872 pounds |
| 5 square feet |
|
4.7 tons |
| 8 feet x 20 feet |
|
150 tons |
|
|
| 1. |
Specify type and size of chuck. |
| 2. |
Select vacuum system and accessories |
3. |
Specify voltage requirements for vacuum system. |
| Example: |
(1) MAV-1224 rectangular vacuum chuck with steel back
(1) TV-171 vacuum system; 115 volts, 60 Hz, 1 phase
(1) TV-110 combination vacuum gage and dump valve
(10 feet) vacuum hose
(2 pair) hose barbs
(50 feet) 1/8 x 13/16 channel seal gasket |
|
|
|
